-
云南包裝廠如何解決包裝印刷中飛墨現象
飛墨、甩墨是高速印刷中一類常見故障,成因復雜、排除有一定難度,但采取必要的措施可以緩解這一現象,改善工作環境。影響飛墨的因素影響飛墨的因素很多,一般可以歸納為油墨因素、機械因素、環境因素等。那要如何…
-
禮品彩印包裝盒材質怎么選?包裝廠有什么建議
禮品彩印包裝盒材質怎么選?包裝盒的設計和功能也是選擇材質的重要因素。例如,如果需要透明度高的包裝盒,可以選擇塑料材質;如果需要印刷效果好的包裝盒,可以選擇紙板材質。因此,在選擇包裝盒材質時,需要根據…
-
印刷包裝品的光澤度如何提高?廠家采用哪些措施
印刷品的表面墨層或里層干燥不良,對覆膜質量危害很大,會造成起泡,脫層等質量問題。影響印刷品的表面墨層干燥有很多因素,如油墨種類,干燥劑的用量,紙張的結構,車間環境的溫濕度等等。那么禮品印刷包裝光澤度…
-
禮盒印刷包裝濕度如何控制?包裝廠是如何做的
印刷包裝濕度如何控制?禮盒包裝三的印刷人員很難在相對濕度處于兩個極點的時候,操控好油墨功能,所以,這一直是困擾印刷人員的一個問題。濕度超越80~85%會使油墨變粘的速度變得很慢;而濕度低于15~20…
-
包裝印刷基本制作工序有哪些?印刷公司如何做的
包裝印刷制作工序有哪些?首先,比較重要的就是制版,現在的禮盒講究外觀美麗漂亮,所以制作的版顏色也是五花八門,通常一種款式的禮盒不僅有4個基本顏色,還有幾專色,比如金色,銀色這些都為專色。
-
彩印廠如何避免印刷包裝盒燙金刮花
在燙金的位置不要過油,這樣會在燙印的時候不穩固,增加燙印的難度。如果是正常的溫度燙印的話,位置不夠牢固,但如果增加溫度的話,會讓燙金的位置模糊。燙金過程中常常會出現刮花的問題,這給包裝的外觀帶來了負…
-
彩印包裝價格受哪些因素影響?為什么不同廠家報價不同
彩印包裝價格受什么影響?為什么不同廠家報價不同?訂單量的大小對價格也有影響。通常來說,大批量的訂單可以降低成本,而小批量的訂單則相對更昂貴。如果包裝需要進行額外的加工和后道工序,如燙金、壓紋、覆膜等…
-
加工彩印包裝中性灰平衡有什么影響?印刷廠一般有哪些要求
中性灰平衡能夠正確復制原稿的灰色,在制版和印刷的時候,中性灰平衡能夠作為一種衡量分色制版和印刷時三原色油墨量比例是否適的尺度來使用。另外中性灰平衡和彩印包裝中底色的去處有著重要的關系。彩印包裝中性灰…
-
云南包裝廠常用的紙箱印刷工藝有哪些
禮品包裝由于要印刷的精美一些,建議采用E瓦楞以上的超薄型瓦楞紙板包裝,厚度控制在1mm-2mm,盒型采用折疊成型異性紙盒即可,E型瓦楞紙剛性強度都是不錯的,而且適于精美印刷。一般紙箱印刷工藝有哪些?…
-
包裝印刷油墨調配要注意什么?昆明彩印廠如何做
油墨的調配是指把一種或多種油墨調和在一起,并加入一定的輔助劑,使之適應印刷需要的全部過程。對包裝印刷油墨進行合理的調配,是保證印刷品質量的重要環節。油墨印刷包括油墨的黏度、粘著性、流動性、干燥性等一…