昆明禮品包裝印刷公司
-
在昆明如何選擇合適的紙箱包裝廠?哪家質量比較好?
在紙箱生產過程中,需要廠家擁有先進的紙箱成型設備,大型的模切機械,各種異型紙箱的設計與加工。為確保紙箱及紙制品的印刷效果,還能采用電腦設計,電腦排版、制版,使圖案、文字達到很好的藝術效果。那么在昆明…
-
昆明包裝公司重型紙箱包裝釘箱和粘箱工藝有什么區別?
紙箱的生產過程包括印刷、成型、粘合、封裝等幾個主要工序,在制造過程中,盒子的附著力屬于尾部,也是其中重要的一環。重型紙箱盒粘接主要分為釘盒和粘盒,說到這里,不少人咨詢紙箱包裝釘箱和粘箱工藝有什么區別?
-
彩印包裝上的油墨不干是什么原因?廠家生產時如何處理的?
彩印包裝上油墨不干是什么原因?一旦出現油墨假干現象,在后工序加工過程中很容易導致印品表面的墨層脫落,這也是很多人都頭疼的問題,這是因為干燥不完全的油墨底層與承印物表面的結合牢度較差,使得墨層在摩擦力…
-
昆明包裝廠彩盒包裝裱紙工藝常見難題是什么?
昆明包裝廠為了避免出紙定位發生偏差,產生橫向裱貼不準的現象,在放置面紙、瓦楞紙的時候,位置需要左右對齊。如果機器上下鏈條位置沒有調準;擋紙限位裝置沒有靠緊紙邊固定住紙張,使紙堆左右竄動。說到這里,大…
-
導致印刷包裝疊印不良的原因是什么?包裝廠分析3點
印刷包裝疊印不良是什么原因?多色印刷時,將油墨轉移到紙張上是在濕壓濕的狀態下進行的。如果紙張吸墨性過高,油墨中的連結料就會過多地滲入紙張內部,使墨層中的油分減小,油墨的顏料粒子被懸浮在紙張表面,導致…
-
怎樣預防彩印包裝出現塌陷?試試包裝廠這些方法
怎樣預防彩印包裝出現塌陷?這是大家普遍關心的一個問題,首先,生產彩印包裝時需要控制好包裝盒內部的水分含量,紙張的含水量不應該過高,大家都知道水分含量過高會影響產品的硬度,進而影響到包裝盒成型之后的邊…
-
云南包裝公司分享印刷包裝制版前要注意哪些問題?
制版前要注意,一般印刷包裝制版前要注意什么呢?拼版的時候要將包裝盒的非圖文部分放在叼口處,連續調圖像不應放在拖稍處,拖稍處放置的是平網或是實地,在云南印刷包裝的時候就容易產生“鬼影”,嚴重的影響了產…
-
昆明包裝公司分析導致彩印包裝縮孔的主要原因是什么?
彩印包裝縮孔的原因是什么?縮孔是包裝印刷墨膜因流平不良而出現的故障之一。油墨印刷后,濕墨膜在流平過程中出現回縮后成了小圓形的外露出承印物材料(底部)或上一道墨層,產生縮孔縮孔是包裝印刷墨膜因流平不良…
-
紙箱包裝印刷要注意什么?云南包裝廠哪家好?
紙箱包裝產品的質量好不好在很大程度上取決于強度高不高,在紙箱生產制造過程中可以采用高壓紙板成形法來增強紙板的強度,采用擴大紙纖維上的受壓點來緊密地壓縮紙板。而紙板結構越緊密,強度就越大。一般云南包裝…
-
紙制品包裝制作遇到紙張起皺怎么辦?包裝公司如何解決?
包裝印刷紙張起皺現象一般都發生在白板紙、涂布紙以及個別定量較低的紙張上。根本原因就是這些紙張在印刷過程中的含水量不均,導致紙張四周起皺,從而影響印刷套準或造成規矩不一致的情況。那么在加工制作過程中遇…